OUR STORY
OEM7720
OEM7720 Dual-Antenna, Multi-Frequency GNSS Receiver
The OEM7720 is a multi-frequency, dual-antenna receiver that delivers robust heading and positioning along with advanced interference mitigation features.
To ensure maximum flexibility, the OEM7720 uses a 555 channel architecture and is capable of tracking all current and upcoming GNSS constellations.
The OEM7720 is scalable to offer sub-metre to centimetre level positioning. This receiver is field upgradable to all OEM7® family software options, including NovAtel CORRECT™ with RTK, ALIGN®, GLIDE® and SPAN®.
Features
- 555 channel all-constellation multi-frequency heading and positioning solution
- Multi-channel L-Band supports TerraStar correction services
- Serial, USB, CAN and Ethernet connectivity with web interface
- Advanced interference visualization and mitigation features
- Firmware solutions including RTK, GLIDE™, STEADYLINE®, SPAN® and ALIGN®
- Simple to integrate, small form factor with 20 g vibration performance rating
- SPAN INS functionality
Attributes
| System Type | Board | |
| General Info | Length (mm) | 71 |
| Width/Diameter (mm) | 46 | |
| Height (mm) | 8 | |
| Weight (g) | 31 | |
| Typical Power Consumption (W) | 1.8 | |
| Signal Tracking | ||
| Primary RF | ||
| GPS | L1 C/A, L1C, L2C, L2P, L5 | |
| GLONASS | L1, L2, L3, L5 | |
| BeiDou | B1l, B1C, B2a, B2b, B2l | |
| Galileo | E1, E5 AltBOC, E5a, E5b | |
| SBAS | L1, L5 | |
| QZSS | L1 C/A, L1C, L2C, L5 | |
| NavIC (IRNSS) | L5 | |
| Secondary RF | ||
| GPS | L1 C/A, L1C, L2C, L2P | |
| GLONASS | L1 C/A, L2C, L2P | |
| BeiDou | B1l, B1C, B2a, B2l | |
| Galileo | E1, E5b | |
| QZSS | L1 C/A, L1C, L2C | |
| NavIC (IRNSS) | L5 | |
| L-Band | up to 5 channels | |
| Number of Com Ports | LVCMOS | 5 |
| CAN Bus | 2 | |
| USB Device | 1 | |
| USB Host | 1 | |
| Ethernet | 1 | |
| Performance | Accuracy | (RMS) |
| Single Point L1 | 1.5 m | |
| Single Point L1/L2 | 1.2 m | |
| SBAS | 60 cm | |
| DGPS (code) | 40 cm | |
| TerraStar-C PRO | 2.5 cm | |
| TerraStar-L | 40 cm | |
| RTK | 1 cm + 1 ppm |
Antennas
GNSS receiver performance is dependent on your choice of antenna. We offer high-performance, compact, anti-jam antennas and ground reference station antennas.
OEM7 Development Kit
The OEM7 Development Kit allows quick and easy evaluation of all features of the OEM7 GNSS cards.
OEM-IMU-EG320N
Commercial MEMS IMU integrates with SPAN® technology to deliver 3D position, velocity and attitude.
OEM-IMU-EG370N
The OEM-IMU-EG370N is a high performing Micro Electro Mechanical Systems (MEMS) Inertial Measurement Unit (IMU) from Epson.
IMU-HG1900
High end tactical grade Mems IMU enclosure for commercial and military guidance and navigation applications.
ALIGN®
Firmware that provides high precision attitude and accurate relative positioning information between two or more receivers in dynamic land, air and marine applications.
NovAtel Connect
NovAtel Connect is a windows-based GUI that allows you to access your receiver’s many features without the need to use a terminal emulator or to write special software.
OEM-HG1900
Gyro-based MEMS IMU manufactured by Honeywell. Economical, robust and small, the low power HG1900 provides high end tactical grade performance.
IMU-KVH1750
The IMU-KVH1750 with NovAtel’s GNSS technology provides continuous 3D position, velocity and attitude solution.
OEM-HG1930
Small, affordable MEMS IMU pairs with SPAN® technology to deliver 3D position, velocity and attitude.
Inertial Explorer®
Expands on the powerful features of GrafNav by adding support for loosely coupled and tightly coupled GNSS+INS processing.
TerraStar Correction Services
Global and regional correction services ranging from 2 cm to 50 cm accuracy for land and airborne applications.
OEM-ADIS-16488
Commercial MEMS IMU integrated with SPAN® technology that delivers 3D position, velocity and attitude.
IMU-LN200
Tactical grade, low noise IMU combines with NovAtel’s GNSS technology to provide 3D position, velocity and attitude solution.
IMU-ISA-100C
High performance tactical grade IMU combines with NovAtel's GNSS technology to deliver 3D position, velocity and attitude solutions.
OEM-STIM300
Commercial MEMS IMU which integrates with SPAN® technology to deliver 3D position, velocity and attitude.
